Yealink Pairing Additional Handsets
The following guide is to be used for when wanting to use more than one handset on a W70B base station, or if replacing an existing handset.
1. Base Station
Put the Base Station into Pairing mode, by pressing and holding the wireless symbol for around 3 seconds and you will see the top light start to flash on the base station.
You now have about 2 minutes to pair the phones.
2. Handset
Ensure that the Base station is still in pairing mode - the top light should be flashing on the Base station as mentioned earlier. If not, then repeat the steps above.
- On the handset that needs pairing, click OK.
- If it says Register on the screen, then Select Base 1. The phone should then proceed with the pairing.
- If it doesn't say Register on the main display then Press OK on the phone
- Go to the Settings icon Scroll down to Registration > Register Handset > Select Base 1. The phone should then proceed with the pairing.
- If the phone asks for a code, enter 0000.
The handset should now be paired. Please leave 30 mins between handset pairing to allow firmware updates to apply.
Any trouble, please contact the DS team at digital.services@brandontrust.org!