Brandon Trust

Login Sign up

Yealink Pairing Additional Handsets

Modified on: Mon, 16 Sep 2024 1:15 PM

The following guide is to be used for when wanting to use more than one handset on a W70B base station, or if replacing an existing handset.


1. Base Station


Put the Base Station into Pairing mode, by pressing and holding the wireless symbol for around 3 seconds and you will see the top light start to flash on the base station.

You now have about 2 minutes to pair the phones.



2. Handset



Ensure that the Base station is still in pairing mode - the top light should be flashing on the Base station as mentioned earlier. If not, then repeat the steps above.


  • On the handset that needs pairing, click OK.
  • If it says Register on the screen, then Select Base 1. The phone should then proceed with the pairing.


  • If it doesn't say Register on the main display then Press OK on the phone
  • Go to the Settings icon Scroll down to Registration > Register Handset > Select Base 1. The phone should then proceed with the pairing.
  • If the phone asks for a code, enter 0000.





The handset should now be paired. Please leave 30 mins between handset pairing to allow firmware updates to apply.


Any trouble, please contact the DS team at digital.services@brandontrust.org!

Was this answer helpful?